悬索在考虑1:3内共振情况下的动力学行为

研究了悬索在受到外激励作用下考虑1∶3内共振情况下的两模态非线性响应.对于一定范围内悬索的弹性-几何参数而言,悬索的第三阶面内对称模态的固有频率接近于第一阶面内对称模态固有频率的三倍,从而导致1∶3内共振的存在.首先利用Galerkin方法把悬索的面内运动方程进行离散,然后利用多尺度法对离散的运动方程进行摄动得到主共振情况下的平均方程.接下来对平均方程的稳态解、周期解以及混沌解进行了研究.最后利用Runge-Kutta法研究了悬索两自由度离散模型的非线性响应.     

Filtration in a Porous Granular Medium: 2. Application of Bubble Model to 1-D Column Experiments

This paper describes the formulation of a quasi-1-D network model, referred to as the ‘bubble model’, and its application for simulating particle transport and filtration through a granular filter bed. The model comprises a series of homogeneous sites linked through bundles of cylindrical bonds that represent flow pathways through distributions of pores and pore throats. This model incorporates pore scale processes of particle sieving and infiltration are based on numerical simulations described in a companion paper. The modeling of infiltration is further refined based on detailed experimental observations and measurements of the filtration of a dilute suspension of acrylic particles through a column of glass beads reported by Yoon et al. (2005 Water Resour. Res., to appear). Their data distinguish (a) between the collection of particles on grain surfaces and at grain-to-grain contact points, and (b) between particles that are fully entrapped and those that are hindered (temporarily collected) and can later become detached. These effects are represented by two parameters that characterize the probability of attachment and are linked to the surface roughness of the grains; one that describes the minimum particle size that can be fully entrapped, and one that describes the detachment rate. These parameters can be readily calibrated from conventional measurements of effluent concentration and effluent particle size distribution. Detailed comparisons with the data reported by Yoon et al. show that the proposed bubble model is able to achieve reliable predictions of the spatial distribution of particles within the filter bed following phases of particle injection and washing.     

沉淀对A1-Cu—Mg合金中锯齿形屈服现象影响及其微观实验研究

经固溶处理的A1-Cu—Mg合金在常应变率拉伸实验中具有显著的锯齿形屈服现象，且屈服行为随固溶处理温度的改变而呈现不同的特征。塑性变形特性与合金材料的微细观结构，尤其是位错运动的演化密切相关。本文运用透射电子显微镜，研究在不同温度下固溶处理的Al—Cu—Mg合金的微观结构，尤其是析出颗粒的大小和含量。并结合宏观的拉伸实验结果，分析Al—Cu—Mg合金动态应变时效的机制。     

Flow properties of a dusty-gas point source in a supersonic free stream

By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves . In this region, formation of " mufti- layer structure" in panicle distribution with alternating low- and high density layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories .     

磁悬浮飞轮转子组件温度场分析与研究

磁悬浮飞轮作为一种航天器的姿态控制执行机构当其工作在高真空环境下时，散热条件差，系统温度过高，导致转子组件热膨胀，产生热应力或改变磁轴承及电机的间隙，则会降低系统的可靠性。利用有限元软件ANSYS对一种磁悬浮飞轮系统的转子组件进行了温度场仿真，考虑了传导及辐射的传热方式，得到了飞轮转子组件的温度场分布，并且分析了组件材料属性对温度场分布的影响，最后对飞轮系统的强化传热进行了研究。分析所得温度值与实验测值相符，为磁悬浮飞轮系统的热设计及总体结构设计提供了重要依据。     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.     

悬索大挠度风振响应的有限体积法分析

基于Lagrange原理,建立了一套新的悬索大挠度动力特性和动力响应分析的有限体积法列式,推导了结点力向量、质量矩阵和单元刚度矩阵的显式表达式。该列式的一个显著特点是直接利用工程应变定义结构变形,其物理意义明确,列式简单,适用于各种垂度和荷载情况的悬索大挠度动力分析。实例动力特性和随机风振响应分析表明,该有限体积列式不仅计算效率高,而且具有良好的计算精度。     

FLOW STRUCTURE FORMATION AND EVOLUTION IN CIRCULATING GAS-FLUIDIZED BEDS

The occurrence of heterogeneous flow structures in gas-particle flows seriously affects the gas-solid contacting and transport processes in high-velocity gas-fluidized beds. Particles do not disperse uniformly in the flow but pass through the bed in a swarm of clusters. The so-called “core-annulus“ structure in the radial direction and “S“ shaped axial distribution of solids concentration characterize the typical flow structure in the system. A computational study, using the discrete particle approach based on molecular dynamics techniques, has been carried out to explore the mechanisms underlying formation of the clusters and the core-annulus structure. Based on energybudget analysis including work done by the drag force, kinetic energy, rotational energy, potential energy, and energy dissipation due to particle-particle and particle-wall collisions, the role of gas-solid interaction and inelastic collisions between the particles are elucidated. It is concluded that the competition between gas-solid interaction and particle-particle interaction determines the pattern formation in high-velocity gas-solid flows: if the gas-solid interaction (under elevated pressure) dominates, most of particle energy obtained by drag from the gas phase is partitioned such that particle potential energy is raised, leading to a uniform flow structure. Otherwise, a heterogeneous pattern exists, which could be induced by both particle -particle collisions and gas-solid interaction. Although both factors could cause the flow instability, the non-linear drag force is demonstrated to be the necessary condition to trigger heterogeneous flow structure formation. As gas velocity increases and goes beyond a critical value, the fluid-particle interaction suppresses particle collisional dissipation, and as a consequence a more homogeneous flow regime is formed.     

Electrophoresis of a 2-particle cluster near a plane boundaryElectrophorèse de deux particules en présence d'une paroi plane

Particle–boundary and particle–particle interactions in Electrophoresis are examined by considering a 2-particle cluster near a plane boundary. The advocated treatment holds for two insulating particles of arbitrary shapes and zeta potential functions and resorts to 13 boundary-integral equations. Preliminary results reveal that, depending upon the addressed velocity nature (translational or angular), wall–particle may be stronger or weaker than particle–particle interactions. To cite this article: A. Sellier, C. R. Mecanique 331 (2003).     

Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

Polydisperse linear polymers are studied in startup of steady shear flow simulations using dissipative particle dynamics. The results show that with an increase in polydispersity the stress overshoot declines while the steady‐state stress increases. Various physical characteristics of the systems are studied including frequency of nonbonded interactions, gyration radius data, flow alignment angles, and average bond lengths. The patterns in the data suggest higher forces are necessary to orient and stretch long chain fractions in the flow direction. Relaxation modulus data prove the broad range of relaxation mechanisms in polydisperse systems. Linear viscoelasticity theory is used to quantify the relaxation spectrum. The results indicate an increase in the longest relaxation time in systems with higher polydispersity. The steady‐state shear viscosity results show higher viscosities with an increase in polydispersity at all shear‐rates. The good agreement of the characteristic behaviors of modeled polydisperse polymers with experiments is encouraging for future work.